EEW 6.0 Motor

Description

This is a replacement motor for the EEW 6.0.  It is also the motor used in the EEW Cone Winder.

This motor will not fit the EEW 6.1 since the pulley is different on that version.

To replace this you can use the included wrench to loosen the motor pulley.   After taking off the motor pulley use a Philips screwdriver to remove the two screws holding the motor in place.  Then unplug the motor and install your new motor.

Here is a video that shows how to install the EEW 6.0 motor.