EEW 6.1 Motor

Description

This is a replacement motor for the EEW 6.1.

This motor will fit the EEW 6.0, but will spin it faster and the flyer arms might hit the case.  Because of this I don’t recommend using this with the EEW 6.0.

To replace this you can use the included wrench to loosen the motor pulley.   After taking off the motor pulley use a Philips screwdriver to remove the two screws holding the motor in place.  Then unplug the motor and install your new motor.

Here is a video that shows how to install the EEW 6.1 motor.